Original Single Axle Caravan Mover
Simply a good solution
The Caravan Mover provides reliable assistance when manoeuvring single-axle caravans without shock absorbers
The manoeuvring aid for single-axle caravans without shock absorbers up to 1,600 kg in weight.
-
manoeuvring by one person without assistance
-
suitable for most single axle chassis
-
powerful drive; also works on difficult surfaces
-
no frame drilling or welding required
-
Radio remote control for safe, easy manoeuvring
-
valuable coupling aid due to centimetre-accurate manoeuvring
-
simple 12V electrical installation
New: Both drive rollers can be operated simultaneously by retrofitting the convenient Cross Actuation facility
Technical Dat
-
Weight: 30 kg
-
Power consumption: average 15 A, max. 60 A
-
Quiescent current consumption: > 15 mA
-
25% climbing capability towing 1,200 kg caravan
-
Speed: approx. 30 cm/sec.
-
Recommended battery 88 Ah (100 Ah would be better)
-
Charger: 4 – 5 A charging power with stabilised output
-
Max. tyre width: 205 mm
New Generation Mover S
The next generation of the Original
You can reliably
manoeuvre your caravan with the Mover S from Truma – conveniently
by remote control.
Be it an entrance, an incline, uneven terrain or hitching to a towing vehicle
– the Mover S makes it child’s play to manoeuvre single-axle
caravans weighing up to 1,800 kg.
The benefits to you:
-
the drive rollers are engaged and disengaged by hand, easily and effortlessly
-
cross actuation as standard - this allows both drive assemblies to be engaged in from one side.
-
the light aluminium rollers protect the tyres
-
Durasoft drive for jerk-free starting
-
Weighs just 35 kg – up to 15 % lighter than comparable manoeuvring systems
-
safe, convenient handling using an ergonomically designed radio remote hand set
-
reliable hold on slopes (25 % with 1,200 kg)
-
caravan can be rotated around its own axis (360°)
-
no low-lying parts – provides the best possible ground clearance
-
the motors are positioned immediately before or behind the axle
-
a powerful drive allows the caravan to be reliably manoeuvred, even on difficult terrain
-
all Mover components are fully protected against water spray and corrosion
-
simple 12 V electrical installation
-
shorter rollers prevent the need for side apron adjustments
Convenient
installation
The Mover S is suitable for almost any single-axle chassis and is easy to
fit – without drilling or welding the frame. The ABE provides you
with 100 % safety.
The original accessories from Truma include individual installation kits
for the different chassis types.
Technical Data
-
12 V DC power supply
-
Average power consumption approx. 20 A (level terrain)
-
Typical power consumption up to approx. 90 A (incline, depends on weight)
-
Maximum power consumption 120 A (controller shut-off)
-
Quiescent current consumption < 15 mA
-
Speed approx. 16 cm per second
-
Weight 35 kg (incl. cross actuation device)
-
25 % climbing capability with gross weight of 1,200 kg
-
15 % climbing capability with gross weight of 1,800 kg
New Generation Mover SE
The Mover SE is
the luxury version among manoeuvring systems –
with electrical engaging
mechanism and Durasoft drive.
Any single-axle caravan or trailer with a gross weight of up to 1,800 kg is easy to move using the Mover SE – simply by pushing a button.
The benefits to you:
-
drive rollers are engaged and disengaged electrically at the push of a button
-
the light aluminium rollers protect the tyres
-
Durasoft drive for jerk-free starting and stopping
-
weighs just 33 kg – up to 15 % lighter than comparable manoeuvring systems
-
safe, convenient handling using an ergonomically designed radio remote hand set
-
the new controller transmits and receives at 868 MHz, providing an extremely stable radio connection
-
reliable hold on slopes (25 % with 1,200 kg)
-
caravan can be rotated around its own axis (360°)
-
no low-lying parts – provides the best possible ground clearance
-
the motors are positioned immediately before or behind the axle
-
all Mover components are protected against water spray and corrosion
-
a powerful drive allows the caravan to be reliably manoeuvred, even on difficult terrain
-
simple 12 V electrical installation
-
shorter rollers prevent the need for side apron adjustments
Even more safety:
- A 13-pin safety socket that
is included in
the scope of delivery prevents the Mover
SE from beeing unintentionally engaged,
for example while driving
- General operating permit
(ABE)
means that no TÜV acceptance is required!
Convenient installation
The Mover SE is suitable for almost any single-axle chassis and is easy to fit – without drilling or welding the chassis.
The ABE provides you with 100 % safety.
The original accessories from Truma include individual installation kits for the different chassis types
Technical Data
- 12 V DC power supply
- Average power consumption approx. 20 A (level terrain)
- Typical power consumption up to approx. 90 A (incline, depends on weight)
- Maximum power consumption 120 A (controller shut-off)
- Quiescent current consumption < 15 mA
- Speed approx. 16 cm per second
- Weight 33 kg
- 25 % climbing capability with gross weight of 1,200 kg
- 15% climbing capability with gross weight of 1,800 kg
